PTX Plug-on Transmitter

Plug-on UHF transmitter with a balanced XLR input for professional dynamic and condenser microphones. Ideal for “handheld” newscaster shots and wireless booms. Ergonomically designed to look good on camera and be lightweight and super durable for swinging around on a pole. It’s easy to program, simple to use and delivers the crystal clear, professional quality sound and performance range that Audio Ltd. is famous for.

Menu

The Menu is navigated via the included SwitchiR infrared controller to adjust all miniTX parameters. You just need to point the SwitchiR at the top of the miniTX within a couple inches to make changes. Press the OK button to set the desired value. Great feature for when the miniTX is “dressed” on the talent already.

Mic Input

The mic input is via a 3-pin XLR connector with locking scew collar to secure the microphone fitting. It can be used with dynamic mics and provides switchable +48V phantom powering for professional condenser microphones.

Powering

Powered only by two AAA type batteries which provides up to 7 hours continuous use depending on battery type. The miniTX is turned off by removing the batteries.

Features

• up to 80 MHz Switching bandwidth in 25 kHz steps
• 512 - 572 MHz and 614 - 694 MHz operating ranges - via 2 frequency blocks
• Compatible with En2 DX, DX2 and CX2 receivers
• Selectable RF output power
• Switchable +48V phantom powering for condenser microphones
• Menu system driven by OLED display and 3-position navigation wheel
• Mute Switch
• Powered by two 1.5V AA batteries for up to 5 hours
• Balanced XLR 3-pin connector with locking screw collar for a "no-rattle" performance
• Durable all metal housing and recessed battery door latch
• Selectable Low Cut Filter at 50 Hz, 100 Hz and OFF
• 32 factory pre-set frequencies
• 32 user selected frequencies in 25 kHz steps can be stored
• Made in the UK