AERIAL ACOUSTICS
MODEL 20T Version 2 LOUDSPEAKER

The Aerial Acoustics Model 20T V2 embodies the sum of what we have learned about loudspeaker design. Every detail has been thoroughly considered, every design decision justified. The result is a remarkable loudspeaker system that faithfully reveals the spirit of music and film and stands as the benchmark for all Aerial designs. The Model 20T V2 produces an astonishingly vivid, forthright, and wonderfully full-range sound with a lifelike quality that is startlingly real. Impeccably finished in high gloss paint or in mirror-imaged premium veneers, it is ideally suited for those who treasure music and movies and enjoy the richness of faithfully reproducing those experiences at home.

V2 represents the second generation of our flagship Model 20T design and incorporates several significant technical advancements. Newly designed long linear excursion woofers feature 3-layer cones consisting of a German Rohacell® core sandwiched between carbon fiber and glass fiber surfaces, thus providing an optimum combination of stiffness, damping, and mass. Aerial designed and handcrafted in Denmark by our manufacturing partner ScanSpeak®, these proprietary drivers deliver astonishingly powerful, exceptionally firm and extended bass. New crossover networks masterfully integrate the system's drivers so that upon listening, the loudspeaker seems utterly transparent.

With a strikingly evident degree of naturalness, the Model 20T V2 effortlessly reveals musical and acoustical details that normally remain hidden within recordings. This extraordinary sense of realism is not the result of a single factor, but of the relentless refinement of myriad design details combined into a cohesive, seamless whole. The Model 20T V2 is at once capable of extreme resolution, exceptional frequency extension, unerring tonal accuracy, and vast dynamics.

All Aerial loudspeaker systems are designed and constructed with fanatical attention to quality and detail. Decades of design and manufacturing experience have taught us that craftsmanship and technology go hand-in-hand when creating products of uncompromising performance and genuine long-term value. World class manufacturing techniques and production equipment are employed, complemented by the work of skilled craftsmen when only experienced hands will do.

The new Model 20T V2. A true modern reference.

 
Specifications:
  • Frequency Response: 25Hz to 35kHz ±2dB. -8dB at 22Hz and 40kHz
  • Sensitivity: 90dB at 2.83 Vrms and 1.0 meter on axis
  • Impedance: 4Ω nominal, 2.8Ω minimum, low reactance
  • Power Requirements: 50 to 800 watts (8Ω rating) recommended
  • Woofers:
    Two 8.9" (225mm) cast magnesium alloy frame drivers
    Rohacell® core cones with carbon & glass fiber surfaces
    Massive vented magnet structures
    2.0" (51mm) diameter ultra-linear long-stroke coils
  • Midrange:
    7.1" (180mm) cast magnesium alloy frame driver
    Carbon filament reinforced damped composite cone
    Large magnet structure with vented machined pole piece
    1.6" (40mm) diameter linear stroke coil
  • Tweeter:
    4.1" (105mm) 5 micron pure aluminum ribbon
    Precision cast aluminum waveguide
    Massive ultra-high Gauss neodymium magnet structure
    High-power self-aligning diaphragm
    Acoustically damped tapered rear chamber
  • Crossover:
    300Hz and 3.5kHz at 24 B per octave Linkwitz-Riley
    Large independent networks on glass-epoxy PCBs
    High-purity copper wiring with Teflon™ insulation
    Ultra-premium passive components. Silver solder
  • Cabinet:
    Compound constrained layer damped 2" thick walls
    Isolated, individually-optimized bass and head enclosures
    Extensive interlocked bracing. Tongue and groove joints
    Mirror-imaged matched pairs in fine architectural veneers
    Limited edition exotic veneers and high gloss finishes
  • Connections:
    Four gold-plated WBT binding posts with copper jumpers
    Bi-wire and bi-amp capable. Head unit cable included
  • Included Bases:
    Laser-cut solid steel bases including stainless steel spikes, machined hardware, and floor protectors
    Gold, silver, or black finishes
  • Dimensions HWD:
    Head cabinet: 15.4 × 10.7 × 22.5" (390 × 272 × 572mm)
    Bass Cabinet: 29.1 x 12.6 x 22.5" (740 × 320 × 572mm)
    Assembled: 47.0 × 12.6 × 22.5" (1194 × 320 × 572mm)
  • Weight Each: 252lbs (115kg). 346lbs (157kg) packed
 
Average Price: $32,000.00
 

For pricing information please refer to the Aerial Acoustics Detailed Pricelist.


 
For more information, see the Aerial Acoustics product review page.
 

Go To AERIAL ACOUSTICS MAIN PAGE

Go to Product Index
Tel (212) 242-3737Credit Cards acceptedFax (212) 924-1243
 

© 1997-2015 Posthorn Recordings

Most recent revision January 1, 2015