SCHOEPS
COLETTE ACCESSORIES, ACTIVE AND PASSIVE |
|
| |
|
Between Amplifier
and Capsule
Colette Active Cables
Colette Active
Tubes
Colette Tube
Hardware
Colette
and CCM- Accessories
Colette Cable
and CCM- Stereo Accessories
|
| |
| |
| BETWEEN
AMPLIFIER AND CAPSULE
see also
Colette Cables and Colette Tubes |
Professional
$ net |
| CUT
1 |
LF Filter
for wind or rumble, 70 Hz cutoff at 24 dB/octave; user dials
in rolloff at 6 dB/octave
|
675.00 |
| CUT
2 |
LF Filter
for wind or rumble, 35 Hz cutoff at 24 dB/octave; user dials
in rolloff at 6 dB/octave |
675.00 |
| DZC 10g |
Pad attenuates
signal before CMC amplifier by 10 dB (in gray Nextel) |
258.00 |
| DZC 20g |
Pad attenuates
signal before CMC amplifier by 20 dB (in gray Nextel) |
258.00 |
| G
90 C |
Elbow offsets
capsule from amplifier body at 90° angle |
Inquire
for Price |
| GVC |
Swivel offsets
capsule from amplifier body; user sets any angle up to 120° |
325.00 |
| SKC 200g |
Gooseneck
with internal cable and electronics: 200 mm (8")
|
530.00 |
| SKC 300g |
Gooseneck
with internal cable and electronics: 300 mm (12") |
570.00 |
| SKC 420g |
420 mm (16.5”) gooseneck
with internal cable and electronics
|
595.00 |
| TR 200 KC 2g |
Desk Stand:
200 mm (8") arm swivels 0°-90° at base, 0°-120°
at capsule; 2 m (6') active cable |
1,100.00 |
|
| |
| |
| COLETTE
ACTIVE CABLES
connects between capsule and amplifier for remote pickup
(see also COLETTE MINIATURE STEREO) |
Professional
$ net |
| KC 5g |
Active
Cable: 5 m (16'), other lengths to 20 m (65') on special order;
internal electronics |
575.00 |
| KC 10g |
Active cable w/internal
electronics, 10 m (32’) other lengths to 65’ special order
|
602.00 |
| WKC 5g |
Active
Cable: As above, but cable exits capsule connector at right angle
to capsule orientation |
665.00 |
|
| |
| |
|
COLETTE
ACTIVE TUBES
|
Professional
$ net
|
|
RC
350g
|
Straight Tube: 8 mm,
0°-120° capsule swivel; internal cable and electronics (CMC-
screws on lower end of RC-;
RG 8 swivel (included) angles RC- on STR- rod
|
350 mm (14")
|
872.00 |
| RC
700g |
700 mm (28")
|
880.00
|
| RC
1200g |
1200 mm (47")
|
890.00
|
|
RC 350 KC 0.5g
|
As above,
but with 500 mm (20") exposed KC- cable to CMC- amplifier,
which mounts on
STR- rod with K 20 STR clamp
|
350 mm (14")
|
990.00 |
| RC 700
KC 0.5g |
700 mm (28")
|
998.00
|
| R2C 350 KC
0.5g |
As
above, but with two RC- tubes mounted parallel on an STR- rod with
an RG 88 dual swivel |
350 mm (14")
|
1,999.00 |
| R2C 700 KC
0.5g |
700 mm (28")
|
2,025.00 |
| R2C 1200
KC 0.5g |
1200 mm (47")
|
2060.00 |
| RCY
350/2 Ig |
Straight tube for two
capsules or M-S stereo: 8 mm, with 2 m (6’) cable,
5-pin Binder plug
Binder plug mates with VMS, VST 62 IU, KS- cables
RG 8 swivel (included)
mounts on STR- rods
K 30 STR mounts VST 62 IU on STR- rods
|
350 mm (14") |
1,510.00 |
| RCY 700/2
Ig |
700 mm (28")
|
1,525.00
|
| RCY 1200/2
Ig |
1200 mm (47")
|
1,539.00
|
|
| |
| |
|
COLETTE
TUBE HARDWARE
|
Professional
$ net
|
| BF
250 |
Floor stand:
heavy, vibration-damped base with twist-lock chuck for STR- support
rod or STV 900/1400 L3 Ug |
210.00
|
| SM
270 |
Vibration
isolation mat for BF 250/STR-mounted RC- or RCY- active Colette
tubes, or STV 900/1400 L3 Ug |
39.00
|
| STR 100g |
Vertical
support rod: 12 mm; holds RC-and RCY- tubes with RG 8
swivel, R2C- tube with RG 88 swivel
|
100 mm (4.5") |
94.00
|
|
STR
250g
|
250 mm (10") |
96.00
|
| STR
350g |
350 mm
(14") |
98.00
|
| STR
600g |
600 mm (24") |
109.00
|
| STR 1000g |
1000 mm
(39") |
126.00
|
| RG 8 |
Swivel joint
for RC-, RCY- tubes |
89.00
|
| RG 88 |
Dual swivel
angles two RC- tubes or one R2C- on STR- support rod |
(see B 55
D) |
190.00
|
| RG 12 |
Stand connector
for connecting two STR vertical support rods or any other rods ca.
12 mm in diameter. The angle may be adjusted over a wide range. Maximum
length of the angled rod when the CMC is fixed at the end and when
no counterweight is used: appr. 50 cm. Color: gray |
88.00
|
| K
20 STR |
Clamp to mount
CMC- amplifier on STR- support rod |
48.00
|
| K
30 STR |
Clamp to mount
VST 62 IU stereo amplifier on STR- rod |
56.00
|
|
| |
| |
|
COLETTE
AND CCM- ACCESSORIES
|
Professional
$ net
|
| AC |
Miniature elastic suspension
with swivel for CCM-, or MK- with KC- active cable |
185.00
|
| ACA
53 |
Boom-mount suspension
for CCM-, or MK- with KC- active cable |
174.00
|
| HC |
Cable hanger with anti-twist
lockring to set lateral orientation; SGC angles CCM- or MK- capsule
|
49.00
|
| SGC |
Stand mount with swivel:
3/8"-16 internal thread; angles CCM- or MK- capsule 0°-100° |
22.00
|
| SGCM |
Metal Miniature Stand
Mount: black anodized metal clamp with thumb wheel for secure grip
of CCM-, or MK- microphone capsule with KC active cable |
77.00
|
| TCg |
Table stand: stable, padded
base with detachable shaft; SGC angles CCM- or MK- capsule 0°-100° |
155.00
|
| TC
2g |
Table Stand: As above,
but holds two MK- capsules or CCMs, each independently positioned
by its own SGC |
260.00
|
| T
5g |
Table stand base in solid
metal with 3/8"-16 threaded stud
Dimensions: diameter: 129 mm, height: 52 mm, weight: 1.5 kg |
258.00
|
|
| |
| |
| COLETTE
CABLE AND CCM- STEREO ACCESSORIES |
Professional
$ net |
| HSGMSC |
Cable hanger for M-S rig
of CCM 8 + CCM- or MK 8 + MK-; with swivel, cable clamp, anti-twist
lockring |
320.00 |
| MS-BLM |
Boundary-layer twin clamp
for M-S (Mid-Side): mounts a CCM 8 or MK 8 + KC 5 on a BLM 3 plate |
75.00 |
| SGMSC |
Mounting stud for M-S
setup of CCM 8 + CCM- or MK 8 + MK-; with swivel, stand clamp, 3/8"-16
adapter |
154.00 |
| STCg |
"ORTF Stereo"
T-bar with SG 20: sets two cardioid CCMs or capsules 17 cm (6.7")
apart and spread 110° |
155.00 |
|
| |
|
