SCHOEPS
COLETTE AMPLIFIERS

 
CMC AMPLIFIERS: TRANSFORMERLESS MICROPHONE BODIES
Professional
$ net
CMD 2U 10V AES-42 DPP, Mode 1 digital input, 24 Bit, specify Fs from 44.1 thru 192 kHz
$1,237.00
CMD 2U xt As CMD 2U above, with extended response beyond 40 kHz, used with axial-access capsules, balanced output.
$1,237.00
CMBIg CMBI, 6V internal battery powered, includes K 5 ISK Cable $656.00
CMC 6Ug CMC 6Ug, 48V or 12V, maximum RFI rejection, Low-cut frequency is 20 Hz, includes SG20, matte gray $799.00
CMC 6Uni CMC 6Uni, 48V or 12V, maximum RFI rejection, Low-cut frequency is 20 Hz, includes SG20, nickel $799.00
CMC 6Ug xt CMC 6Ug xt, 48V or 12V, 40K Extended Response, Low-cut frequency is 20 Hz, includes SG20, matte gray $939.00
CMC 6Uni xt CMC 6Uni xt, 48V or 12V, 40K Extended Response, Low-cut frequency is 20 Hz, includes SG20, nickel $939.00
CMC 5Ug CMC 5Ug, 48V, Low-cut frequency is 30 Hz, includes SG20, matte gray, SPECIAL ORDER ONLY $849.00
CMC 5Uni CMC 5Uni, 48V, Low-cut frequency is 30 Hz, includes SG20, nickel, SPECIAL ORDER ONLY $849.00
+ 5dB + 5dB Sensitivity option on CMC Amplifier $33.00
* "-LIN" Linear version: -3 dB at 20 Hz, for an additional
$33.00
M 222g AC M 222 Tube Microphone Amplifier Set (NT AC PS), matte gray $2,425.00
M 222g DC M 222 Tube Microphone Amplifier Set (NT DC PS), matte gray $2,425.00

CMC Amplifer Engraving for an additional $30.00 per line. Special Order only
No charge for +5 dB option on CMC Amplifiers. Special Order only

CMR AMPLIFIERS WITH ATTACHED CABLE FOR
WIRELESS POCKET TRANSMITTERS
Professional
$ net
CMRg, 2 Meter  CMRg microphone amplifier with 2 meter (6.5') cable, unterminated $547.00
CMRg, 2 Meter TA5F CMRg, 2 meter (6.5') cable, with TA5F wired for Lectrosonics transmitters $642.00
CMRg, 2 Meter LEMO3 CMRg, 2 meter (6.5') cable, with Lemo 3-pin for Sennheiser SK50 $642.00
CMRg, 5 Meter CMRg microphone amplifier with 5 meter (16') cable, unterminated $583.00
CMRg, 5 Meter TA5F CMRg, 5 meter (16') cable, with TA5F for Lectrosonics transmitters $678.00

 

RCMR 350g RCMR 350g, Not terminated, requires wireless connector installation RCMR Install, includes RG 8 $681.00
RCMR 700g RCMR 700g, Not terminated, requires wireless connector installation RCMR Install, includes RG 8 $687.00
RCMR 1200g RCMR 1200g, Not terminated, requires wireless connector installation RCMR Install, includes RG 8 $699.00

 

SCH576, Connector installation by Schoeps on an "unterminated" CMR or RCMR. $109.00

 

** For Sennheiser SK50 transmitters, the CMR must be ordered with the termination installed by Schoeps. It is only available with a 2 meter cable. We do recommend that all terminations are installed by Schoeps. Schoeps has confirmed compatibility with current and legacy Lectrosonics (TA5F) models, Audio Ltd. and Sennheiser SK 50. Other connector terminations available as a special order - exact wireless brand and model info is required. The Schoeps CMR will NOT work with know Zaxcom transmitters or the Sennheiser EW Series. The CMR also will NOT work with Colette Active accessories (e.g. CUT1, KC 5g) or the BLM 03 Cg. A DZC- pad or GVC swivel are the exceptions and can be used.

 

Go to SCHOEPS CATALOG page
 
Go to Product Index
Tel (212) 242-3737Credit Cards acceptedFax (212) 924-1243
 

© 1997-2015 Posthorn Recordings

Most recent revision: March 24, 2015